peter66
Member Since: 17 Nov 2020
Location: Nybro
Posts: 3
|
I have an LR3 that has been standing for about a month and has then sunk down completely. When I start the car, the compressor turns off after just a few seconds, this has worked before when the car has been standing for a while. Thanks for any tips how to proceed?
/Peter
|
7th Jan 2024 12:44 pm |
|
|
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6589
|
Read the codes
|
7th Jan 2024 1:42 pm |
|
|
peter66
Member Since: 17 Nov 2020
Location: Nybro
Posts: 3
|
I used Faultmate MSV-2 c1a31, c1a13, c1a03, u0133, c1123, c1b18, u1a14
|
11th Jan 2024 12:28 pm |
|
|
Breg90
Member Since: 04 Feb 2017
Location: Falkirk
Posts: 350
|
Those are not the full length codes. There is another digit that’s better code reader (gap IID) would read Series one 1949 - in bits, chassis is strapped to the ceiling in my garage (beside the canoe)
LR 90 - In bits
Disco 3 - currently in bits
|
11th Jan 2024 7:39 pm |
|
|
peter66
Member Since: 17 Nov 2020
Location: Nybro
Posts: 3
|
What should the codes look like? Don't have gap IID but will try another OBD reader.
|
12th Jan 2024 6:21 am |
|
|