Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Greetings and 1st technical problem
Post Reply  Down to end
Page 1 of 1
Rollbar77
 


Member Since: 13 Aug 2008
Location: Edinburgh
Posts: 2

Scotland 2006 Discovery 3 TDV6 SE Auto Zermatt SilverDiscovery 3
Greetings and 1st technical problem

Hello Everybody! I have just bought an 06 Discovery SE and would just like to say what a great and really useful site. Have used a lot of advice on this site already and have only had my Discovery two weeks.

I am hoping someone will be able to advice me on a problem. My engine seems to make quite a loud chugging noise accompanied by, what sounds like, a fan belt slipping noise although not as loud. It only happens between approx 10mph to 30mph under acceleration. There does not seem to be any loss of power.

I have taken it back to the dealer who (although agreeing he can hear it) cannot find anything wrong. He then told me he drove a Discovery of a similar age and heard the same noise but not as loud.

Just wondering if anyone else has this problem or has any suggestions.

Once again great site

Thanks
  
Post #33209813th Aug 2008 8:46 pm
View user's profile Send private message View poster's gallery Reply with quote
Jads777
 


Member Since: 03 Sep 2005
Location: Channel Islands
Posts: 697

Guernsey 
Re: Greetings and 1st technical problem

Hi Rollbar

Rollbar77 wrote:
I have taken it back to the dealer who (although agreeing he can hear it) cannot find anything wrong.
= dealer can't be arsed to look any further?


Rollbar77 wrote:
He then told me he drove a Discovery of a similar age and heard the same noise but not as loud.
I should try another dealer. The technical bods on here may be able to advise you.  
Post #33213613th Aug 2008 10:00 pm
View user's profile Send private message View poster's gallery Reply with quote
90BHP
 


Member Since: 18 Oct 2006
Location: Half way along the road on the right
Posts: 3706

United Kingdom 2009 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

cannot find anything wrong = Plugged into computer and no fault found. Lots of dealers have lost the art of problem solving . . . .

Welcome and go find another dealer.
 "To finish first, one first has to finish ...."  
Post #33213813th Aug 2008 10:04 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
B16 KJR
 


Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005

Scotland 

Will take a guess and say its either Pentland or Stratstones. Unfortunatley this is pretty normal, even worse if you go west and use Shields, thats why I am taking mine all the way down to Lakeland for its next service in 2 weeks time.
  
Post #33224514th Aug 2008 11:16 am
View user's profile Send private message View poster's gallery Reply with quote
8754WX
 


Member Since: 21 May 2008
Location: Billingham
Posts: 86

England 2005 Discovery 3 TDV6 HSE Manual Zambezi SilverDiscovery 3

Get them to check the exhaust link pipe from each bank to make sure there is no splits in it, Exclamation
  
Post #33227114th Aug 2008 1:04 pm
View user's profile Send private message View poster's gallery Reply with quote
AndrewS
Tarquin of the Desert 


Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438

United Kingdom 

Could be a belt tensioner pulley on its way out.
 In the Beginning there was nothing, which exploded.  
Post #33229314th Aug 2008 1:43 pm
View user's profile Send private message View poster's gallery Reply with quote
90BHP
 


Member Since: 18 Oct 2006
Location: Half way along the road on the right
Posts: 3706

United Kingdom 2009 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

Oh yea. I forgot Embarassed I had a similar sounding problem. Dealer diagnosed worn bearing on a belt tensioner. Had new aircon compressor under warranty. Think mine stopped grumbling initially when I turned air-con off. But that "fix" didn't last for long
 "To finish first, one first has to finish ...."  
Post #33229814th Aug 2008 1:57 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Rollbar77
 


Member Since: 13 Aug 2008
Location: Edinburgh
Posts: 2

Scotland 2006 Discovery 3 TDV6 SE Auto Zermatt SilverDiscovery 3

Thanks for all the replies.

At last Stratstone managed to fix it. Apparently something to do with fuel lines being wrongly routed causing excessive vibration. Seems strange thats what caused so much noise but its fixed anyway!

Thanks again
  
Post #33845131st Aug 2008 7:27 pm
View user's profile Send private message View poster's gallery Reply with quote
MacLeod 313
 


Member Since: 18 Apr 2008
Location: away
Posts: 10723

Scotland 2006 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

could it not just be the viscous fan people......when you 1st start up then it goes
  
Post #33845531st Aug 2008 7:41 pm
View user's profile Send private message View poster's gallery Reply with quote
nealgs
 


Member Since: 13 Jan 2008
Location: Leeds
Posts: 327

England 2006 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

I think the viscous sound is more of a roaring noise than a crunching noise - at least thats what ours sounds like Smile

Gary
 Gone: Java Black TDV6, Auto, HSE - yum, yum Smile
(Gone: 96' V8 ES Charleston Green, 96 V8 ES Black)
Toy: Southern Roadcraft Cobra, 383ci Chevy V8


Club - HiVis Smile
Club - Disco3.co.uk Round Stickers
Club - Disco3.co.uk External Badge 
 
Post #3385451st Sep 2008 12:14 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site