chillisauce
Member Since: 04 Sep 2007
Location: St Cergue
Posts: 32
|
Tow bar wiring - where do the cables go??? |
|
Just fitted a new tow bar and leccy (thanks TLO).
However, after spending about an hour on my back in the cold, I still can't figure out where to put the cables under the wagon to keep them away from the damper.
All seem to be pluged in ok and clipped on where i can see clips, it goes over the top of the damper but rubs on the near side, outside damper by the cross member, as it turns vertical to the lights
Any ideas please (maybe with pics) as i'm not sure my Nobby Styles can handle another day in the arctic temps under the beast.
Thanks D3 Zermatt Silver TDV6 HSE (have)
Triumph Tiger 800XC (just have)
Defender 110 (did have)
SIII Ex-MoD 109 (did have)
Orange P7 + Specalized Roubaix (still have)
|
10th Jan 2009 10:57 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6246
|
They just need tucking further in on the top of the chassis rail out of the way, towards the rear of the car..
Flack
|
10th Jan 2009 11:23 pm |
|
|
90BHP
Member Since: 18 Oct 2006
Location: Half way along the road on the right
Posts: 3706
|
Wot he said, take your time to get them on top of the chassis rail. Oh and the weather is due to be warmer tomorrow "To finish first, one first has to finish ...."
|
10th Jan 2009 11:31 pm |
|
|