bobbycrispbox
Member Since: 15 May 2006
Location: Derbyshire
Posts: 2514
  
|
The light switch mod is hard work - as has already been said, the dimmer control will fall off and you stand an excellent chance of putting the main dial back in the wrong position which causes all sorts of problems. I've had mine in bits that many times that in the end I had to order a new switch from TLO. It works now but I really don't want to take it apart again.
Slightly easier to fit is a switch next to the DSC button:
Again, it needs the switch assembly taking apart but it's easier to do and harder to break.
|
 Fri Jan 30 2009 4:18pm |
|
|
SN
Member Since: 03 Jan 2006
Location: Wishing I was ...
Posts: 11795
 
|
you writing your own 'crispbox additions manual' for yours then Rob - there's so many extra switches and stuff on it its gonna need one soon?
what DOES that one do then? ejector seat?  Steve N | 2008 TDV6 SE Auto  | Was 2006 TDV6 S Auto  | Club Tunisia | Am I Online?
|
| Fri Jan 30 2009 4:38pm |
|
|
disco_doozle
Member Since: 03 Nov 2007
Location: Bree
Posts: 437
 
|
phurley wrote:Pull from the bottom lip of trim piece until it releases from the 2 bottom clips. Rotate up slightly, then straight out. (there are 2 locating tabs with a small lip at the top of trim.)
Just a note about the headlamp switch: when you disassemble it, the interior dimmer control wheel is likely fall out because it's spindle just sits in 2 slotted tangs. When you reassemble the switch, note that there is a single large tooth on the control wheel gear and a matching large slot on the mating gear. Line those up and be careful to not disturb it while snapping the switch cover back on.
Pics when you're done?
Ooow yes, please make me nervous 
If it's likely to fall apart...it will stay as it is 
Next place please....hihi Disco 3 TDV6 Aut. 7 seat, Zambezi silver, Privacy glass, Rosen A9 DVD, Tow-kit, K&N airfilter, Frontrunner Windcheetah + 4xHella Comet 550, tailgate ladder, 5 breaklights  , Performance BB6 17" + AT2 General Grabbers, RLD Skid-plate, BAS Remap magic, Traxide second battery setup, Lightguards, BAS EGR's blank kit, BAS Silicone hose, Black bonnet decal,
|
| Fri Jan 30 2009 5:01pm |
|
|
