Member Since: 20 Jan 2008
Location: Cornwall
Posts: 3
Windscreen pillar trim
Crossing the M62 in high winds at the weekend, loud bang as the pillar trim from the drivers side detached itself, whacked the bodywork and flew off never to be seen again... which was exciting
These windscreen fitting companies tend to cut costs/corners on replacing the clips on these and they need to be replaced everytime they are removedTLO has left the building.......
I no longer work for a Landrover Dealer
My little chilli sauce business http://www.thechillees.co.uk
if you would like to order anything just give me a shout
27th Aug 2008 5:25 pm
Verydisco
Member Since: 02 Jan 2005
Location: A bit there, a bit over there and sometime at home, France
Posts: 1006
wouahou ! weird indeed
anyway, it is just you Disco telling you he wants a RAI A.S.A.P l=Oo\________/oO=l l:Ool======loO:l
Current
RANGE ROVER Vogue 4.4L TDV8 - 2012 - Orkney Grey, on Black, on Piano Black.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
FREELANDER 2 Td4 HSE "000" - Santorinin Black on Black
Gap Diagnostics' Classic and BT IID Tools!
Previous:
RANGE ROVER TDV8 x3
RANGE ROVER Td6 x1
RANGE ROVER Classic 3.5L V8 x1
DISCOVERY III x3
DISCOVERY II x3
DISCOVERY I x4
27th Aug 2008 5:49 pm
monkey hanger
Member Since: 17 Jan 2008
Location: London
Posts: 291
I was crossing the long bridge over the medway on the M20 2 weeks ago and the same thing happened to mine-- but it hung on by one clip. the bang woke my son up who then screamed for the rest of the journey
I've never had a replacement windscreen or any work on it?!
Was a particularly windy day and I have to say I was going quite quickly.
the panel clips up into a slot at the top then poppers on lower down. I have to say it looked quite flimsy once it was off"its probably a virus, you'll be right as rain in a few days and if you're playing sport try to favour the other leg"
These windscreen fitting companies tend to cut costs/corners on replacing the clips on these and they need to be replaced everytime they are removed
Had exactly this issue after getting a new windscreen on my D2 - bleepin' A pillar trims went AWOL!
Slightly disturbed to see the LR3 still has the same technology holding things on - or not....08 LR3 SE V8 - 02 D2 SE7 V8
Porsche 911 (03 996) - 2013 MINI Cooper S
28th Aug 2008 3:14 am
sideview
Member Since: 02 Dec 2006
Location: in the valley
Posts: 1663
Verydisco wrote:
anyway, it is just you Disco telling you he wants a RAI A.S.A.P
Afraid not
I'm not so good at giving advice...may I offer you a sarcastic comment instead?
I've had it happen numerous times. I replaced the clips on each occasion.
Air can stream under the cover from the windscreen side, so if you do a fair few miles into strongish winds, the pressure on the clips is too much.
I solved the issue in the end by drilling in a stainless steel screw down towards the bottom of the cover. It's not very noticeable and so far the cover has stayed on.
I'll post a picture later.Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
I drilled a small hole in the bottom of the side trim and the edge of the scuttle trim (the one at the bottom of the screen) and connected them together with a small tie wrap. It's not noticeable with the bonnet down. I'm fairly sure the trim came off due to wind getting under it on the glass side, so this mod stops it lifting, and I've had no problem since. Like the others on here, the problem seems to occur at 'high' speed Previously:
2005 D3 2.7 TDV6 S
1984 90 2.25 Petrol CSW
1992 90 200TDi Hard Top
1995 Discovery ES 300TDi
2003 90 TD5 Truck Cab
4th Sep 2008 12:45 pm
Rob H
Member Since: 12 Jul 2007
Location: North East Scotland
Posts: 87
Hi,
This has happened to me 3 times since the car has been out of warranty - none before of course!
Never lost the trim, but on the second occasion I lost some clips so my dealer fitted a new trim as the old trim was slightly damaged anyway.
Jamo, Ridgeback_moor I would be interested to see what you did, any chance of some pictures. I know that your fixes will not stop the trim from unclipping (I think, correct me if I am wrong), but at least the trim would stay attached to the car, instead of being lost, or worse still hitting another vehicle.
Thanks.
Rob2005 TDV6 base model 7-seater manual
16th Jan 2009 10:19 pm
Rob H
Member Since: 12 Jul 2007
Location: North East Scotland
Posts: 87
It has happened a few more times since my last post. In fact 3 times yesterday here in NE Scotland, twice at the same place going in the same direction. I was only driving at about 40 mph but the wind was blowing a bit!
I have now put 3 large blobs of Blu-Tack under the trim hoping that this might hold it in place.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
