- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
- If you have a DISCO3.CO.UK account you do not need to re-register, just Log In as normal
MrH
Member Since: 08 Aug 2007
Location: Fooked if I know, and who cares anyway
Posts: 3982
  
|
Here's the pictures of them fitted, I put one of the covers on for comparison:
 | | Click image to enlarge |
 | | Click image to enlarge |
 | | Click image to enlarge |
One critisism is that they stick out quite a bit infront of the bumper, so they'll be first point of contact - well until the winch gets fitted 
|
 Sun Jan 31 2010 5:59pm |
|
|
MrH
Member Since: 08 Aug 2007
Location: Fooked if I know, and who cares anyway
Posts: 3982
|
First night drive in the D4 this evening and all I can say is:
If you have a D4 with Xenon Headlights, don't bother with the LR OEM Driving lamps, all the offered was a very faintorange glow in the distance, so faint that I had to switch them on and off about 4 times before I realised they were actually working 
Me thinks, LF240s with LF HID conversion kit is the forward, but not until the A-bar is on so I can check they actually fit. Looking at the accesories brochure I might had to make do with the LF170s.
|
| Mon Feb 01 2010 7:58pm |
|
|
wiggs
Site Sponsor
Member Since: 03 Sep 2006
Location: Manchester
Posts: 8570
 
|
Still have a few of these if your interested
 G4 Gone ...but not forgotten
*New D4 Bluetooth modules ...Pm me for details*
*New Engine ECU 's .. 3.0L ...Pm me for details*
*Timed climate remotes ...Pm me for details *
*Digital TV tuners ....PM me for details
FAULTMATE MSV2 - D3 & D4 MULTI LICENCE
4X4 info screen enabled / off road sat nav unlocking / bluetooth upgrades , D4 timed climate and more ..contact me for more info
|
| Mon Feb 01 2010 8:09pm |
|
|
DrLex
Member Since: 15 Jul 2005
Location: Ciderspace [Oi be in Zummerset]
Posts: 3393
  
|
2 Qs:
Is that a new horn I can see behind the grille in picture #2?
Does running the wires through the grille mean you have to unclip the loom to take the grille off completely? Time flies like an arrow; fruit flies like a banana
Member of Club Med Sucks
|
| Mon Feb 01 2010 8:19pm |
|
|
MrH
Member Since: 08 Aug 2007
Location: Fooked if I know, and who cares anyway
Posts: 3982
|
Don't know about the horn, but does look like it.
Yes you need to remove the grille you need to unplug the lamps, but that is the same the D3 (even before I changed to LF240s)
|
| Mon Feb 01 2010 8:29pm |
|
|
MrH
Member Since: 08 Aug 2007
Location: Fooked if I know, and who cares anyway
Posts: 3982
|
Whoever it was that asked me for the installation instructions, I now have a pdf copy but lost your PM which gave me your e-mail, please PM me again 
|
| Fri Feb 19 2010 7:11pm |
|
|
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1084
|
MrH do those lamp mounts screw through the bumper
I thought the D3 ones were metal and bolted behind the grill, but its been a while since I read the instructions (and decided swmbo would not need them on the way to Sainsburys anyway).
|
| Tue Feb 23 2010 8:14pm |
|
|
MrH
Member Since: 08 Aug 2007
Location: Fooked if I know, and who cares anyway
Posts: 3982
|
You have a choice of mounting - well you will have when the A-Bar is released for sale.
You either have an A-bar with the approporiate mounting kit, or the bumper mounting kit - the later is what I have and yes that requires the bumper to be cut/drilled as the lamps fix onto mounts which inturn are bolted to the steel bumper lower down - Exactly as they di on the D3
|
| Tue Feb 23 2010 8:46pm |
|
|
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 398
 
|
Mr H where is the switch mounted on the D4?? MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
| Mon Aug 09 2010 9:00am |
|
|
MrH
Member Since: 08 Aug 2007
Location: Fooked if I know, and who cares anyway
Posts: 3982
|
Opposite the EPB switch i.e. it's a plastic insert shaped similar to the EPB switch, but has the light swicth in the top of it. Picture below:
|
| Mon Aug 09 2010 6:46pm |
|
|
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 398
|
very neat - thanks! MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
| Tue Aug 10 2010 4:03am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
