ronny sutton
Member Since: 16 Mar 2010
Location: essex
Posts: 1
  
|
we have a tdv6 07plate with fault codesP045D P140B P045C can anyone help with fault location and cure
|
 Tue Mar 16 2010 11:54pm |
|
|
|
|
Durrus
Member Since: 17 Mar 2008
Location: Kildare
Posts: 7
 
|
Ronny,
Where do you see the error codes? I'm having problems, but I thought only a dealer could see the error codes!
Regards,
Durrus. 06 Tonga Green TDV6 HSE
|
| Mon Mar 29 2010 6:14pm |
|
|
discodude
Member Since: 03 May 2011
Location: NORFOLK
Posts: 13
|
i also have a fault code it is u0421 invalid data received from ride level control module any help please.
|
| Tue May 03 2011 8:01pm |
|
|
discodude
Member Since: 03 May 2011
Location: NORFOLK
Posts: 13
|
sorry it is for disco 3 05 plate.
|
| Tue May 03 2011 8:03pm |
|
|
gsr 341
Member Since: 15 Jan 2011
Location: north wales
Posts: 77
|
go to http://bellautoservices.co.uk/ put your falt code in to the search bar and hey presto fault relating to the code appears , 
|
| Thu May 19 2011 10:23am |
|
|
Dunny1
Member Since: 18 Jun 2011
Location: Aberdeen
Posts: 97
|
Hi All
I,m a new member to this site and hey I,m impressed with all the info that I have found out already compared to other sites or forums as i,ve owned landys now for the last 12 years so keep up the good communication up and info flowing.
Can anyone help me out here with a fault code U2023. A couple of weeks ago the EMS warning lights popped up with a big F and i lost all power during overtaking, had to quickly pull in and turn the engine off then restart. Since then the car,s been very slugish until I could get it looked at, I have had it checked and it,s power is back but the EMS warning light still pops up and a fault code P0489 but i do have power back, the cars quick but a bit slow when pulling off, so most likely will have to get the EGR,s changed out or if possible blanks fitted if they amke blanks now for that model.
Any feed back would be most appreciated
|
| Sat Jun 18 2011 12:09pm |
|
|
KevG
Member Since: 27 Mar 2011
Location: Gtr Manchester
Posts: 106
 
|
Dunny check the post above yours 
|
| Sat Jun 18 2011 12:14pm |
|
|
Dunny1
Member Since: 18 Jun 2011
Location: Aberdeen
Posts: 97
|
Thanks KevG have tried the site but there is no comments on it all it says is Torque problems but doe,s not give any other info.
|
| Sat Jun 18 2011 5:32pm |
|
|
KevG
Member Since: 27 Mar 2011
Location: Gtr Manchester
Posts: 106
|
P0489
Exhaust gas recirculation control – circuit low
|
| Sat Jun 18 2011 5:41pm |
|
|
Dunny1
Member Since: 18 Jun 2011
Location: Aberdeen
Posts: 97
|
Thanks
KevG i do plan to change them or see if any one knows if blanks are available for a D3 2.7 2007 the fault U2023 is the fault that is causing me a headache as i can,t find much info on it.
|
| Sat Jun 18 2011 6:30pm |
|
|
KevG
Member Since: 27 Mar 2011
Location: Gtr Manchester
Posts: 106
|
Dunny, someone may correct me on this but I don't think you can blank them off for MY 2007
Bell Autos (site sponsor) do the kits but if you check his site HERE you can see the notice at the bottom of the page relating to MY 2007 vehicles.
|
| Sat Jun 18 2011 10:48pm |
|
|
Dunny1
Member Since: 18 Jun 2011
Location: Aberdeen
Posts: 97
|
KevG thanks for your feed back I will contact Bell Autos to see if they have developed any method for blanking.
ps I,m still surfing the net to try and find out what U2023 is once my problems solved i have a couple of things to place on the Site with regard to problems encounted and the fixing of D3,s
|
| Sun Jun 19 2011 8:59am |
|
|
dsd1036
Member Since: 27 Feb 2010
Location: Surrey
Posts: 1267
|
2007 MY can't be blanked off 
|
| Sun Jun 19 2011 10:03am |
|
|
Dunny1
Member Since: 18 Jun 2011
Location: Aberdeen
Posts: 97
|
Thanks
dsd1036 for the info
|
| Sun Jun 19 2011 10:37am |
|
|
