Daveyboy
Member Since: 15 Dec 2009
Location: East Yorkshire
Posts: 55
  
|
| ABS panels on D4 commercial |
|
Has any one had a go at removing them? Even after a week finding it tricky to pull out of some junctions and would like to try and get the rear windows to open for the dog. All switches and window motors in place though looks like a part has been removed that was attached to the motor. Any one got a pic of a complete one? 
|
 Sun Aug 15 2010 7:02pm |
|
|
Geo
Member Since: 03 Sep 2007
Location: East Lothian
Posts: 42
 
|
Removed the panels from the rear passenger doors within half an hour of the Land Rover being delivered.
I took a large kitchen knife with a blade that wouldn't bend and worked along the top of the door until I could get enough to grip, then pulled them off. Big improvement. Would be good if the windows would open as well.
|
| Sun Aug 15 2010 7:47pm |
|
|
Daveyboy
Member Since: 15 Dec 2009
Location: East Yorkshire
Posts: 55
|
God knows what they've used on these!!
Must have used about 2 tubes of thick adhesive on each panel.
Do the car's have some extra trim around the doors?
|
| Thu Aug 19 2010 2:58pm |
|
|
sbrown
Member Since: 30 Apr 2010
Location: S. Yorkshire
Posts: 78
 
|
Is the glass tinted as well??
I'd be interested in removing the panels when I get mine, be great to see some photos of with / without and ideally some idea of how it's fastened. In fact, any more info on this would be great. Gives me some ideas for planning that way.
Cheers
Steve
|
| Thu Aug 19 2010 3:05pm |
|
|
Daveyboy
Member Since: 15 Dec 2009
Location: East Yorkshire
Posts: 55
|
Me and a Mate finally got the  off after much pulling and cutting.
Needless to say they won't be going back on now there in bits.
Steve the windows are tinted and they are very dark.
Just need to find out which bit is missing off the window motors.
Does anyone have a parts drawing for the rear doors??
|
| Fri Aug 20 2010 8:10pm |
|
|
bellautos
Site Sponsor
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 1858
|
You need 2 new window motors and the window frame trims, the motors that are fitted have an electrical connection part missing and the hole where it should sit is filled with screen bonding glue, ive a conversion to do the week after next.
Ill dig out the pictures ive taken and do a bit of a how to time depending.
Pete Click here to download the BAS 3.90 interface software.
|
| Sat Aug 21 2010 9:14pm |
|
|
Daveyboy
Member Since: 15 Dec 2009
Location: East Yorkshire
Posts: 55
|
Cheers Pete. Where in york are you? Can you do LR approved services for lease motors?
|
| Sat Aug 21 2010 10:57pm |
|
|
|
|
LiftedDisco
Member Since: 10 Jun 2010
Location: Towcester
Posts: 252
|
I should also be most interested... particularly in the cost of the replacement 'car' trims to finish the window space.
I understood from a chap here in Northants that the connectors were both in place but that both were filled with Tiger seal (or similar) and that he had spent the time picking this out in order to get the windows working.
He did also comment that removal of the ABS panel was far easier with the windows working as this meant that he could apply pressure from the outside as well as tugging from the inside...
Will watch this with great interest and look forward to photos and any info.
Cheers
Rob
|
| Sun Aug 22 2010 7:02am |
|
|
Daveyboy
Member Since: 15 Dec 2009
Location: East Yorkshire
Posts: 55
|
Pete, how did you get on with the conversion?
I would be interested in a cost for the window trims and any parts needed to get the rear windows to work.
|
| Tue Sep 21 2010 9:02pm |
|
|
|
|
Nick_W
Member Since: 18 Nov 2008
Location: Nottingham
Posts: 14
|
A bit of info that I thought be of help... collecting my new new D4 commercial from the dealers tomorrow, with regards to the plastic window panels, the dealer got replacemnet trims in for me at a cost of £35 as they now have to be cut out, I can't comment if its a tricky job though as the guy doing my seat conversion did it for me!
I'll post some pics hopefully tomorrow when I collect it..[/img] Disco 4 Commercial 3.0 TDV6, Stornoway Grey, 20" 10 spoke alloys , Sat Nav, Luxury Pack, DAB, Colour Coded
|
| Fri Oct 15 2010 3:15pm |
|
|
Ent
Member Since: 12 Oct 2007
Location: Gt Eccleston
Posts: 3146
|
Its a 5 minute job either side. Club Exped trailer
Club Timed Climate
Club Flappy paddle steering wheel
Club 300bhp
Club iPad
Club Pie and Peas
Club National Luna Stella conditioner
|
| Fri Oct 15 2010 4:13pm |
|
|
wiggs
Site Sponsor
Member Since: 03 Sep 2006
Location: Manchester
Posts: 8565
|
Nick_W wrote:A bit of info that I thought be of help... collecting my new new D4 commercial from the dealers tomorrow, with regards to the plastic window panels, the dealer got replacemnet trims in for me at a cost of £35 as they now have to be cut out, I can't comment if its a tricky job though as the guy doing my seat conversion did it for me!
I'll post some pics hopefully tomorrow when I collect it..[/img]
Do you mean you have purchased the same as whats on there and are going to cut the middle out ?
You can get the original trims ...dont need to be cut out at about £15 each G4 Gone ...but not forgotten
*New D4 Bluetooth modules ...Pm me for details*
*New Engine ECU 's .. 3.0L ...Pm me for details*
*Timed climate remotes ...Pm me for details *
FAULTMATE MSV2 - D3 & D4 MULTI LICENCE
4X4 info screen enabled / off road sat nav unlocking / bluetooth upgrades , D4 timed climate and more ..contact me for more info
|
| Fri Oct 15 2010 5:27pm |
|
|
Nick_W
Member Since: 18 Nov 2008
Location: Nottingham
Posts: 14
|
No the original trims, so £35 for the pair seems about right! Disco 4 Commercial 3.0 TDV6, Stornoway Grey, 20" 10 spoke alloys , Sat Nav, Luxury Pack, DAB, Colour Coded
|
| Fri Oct 15 2010 5:33pm |
|
|
