Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Webasto Fuel Burning Heater

Webasto WTT 2.14 on Windows10?
Post Reply  Down to end
Page 1 of 1
Frisian Driver
 


Member Since: 23 Aug 2021
Location: Baden-Würtemberg
Posts: 80

Germany 2008 Discovery 3 TDV6 Base 7 Seat Auto Barolo BlackDiscovery 3
Webasto WTT 2.14 on Windows10?

Hi. I use the WTT 2.14 app with an USB-OBDII cable on WINDOWS7. The cable ist fron this shop. No problems at all! Now I have to change the laptop and the operating system to WINDOWS10. But it doesn't work.

What can I do? A new driver? A new WTT app e.g. WTT3.x?

Thanks in advance.
  
Post #224806224th Aug 2021 11:50 am
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 4577

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3

Hi and welcome.

It will work on W10 you just have to do a small bit of lateral thinking Smile

If I recall correctly you need to open the "Device Manager" > then tick "View" > then tick "Show Hidden Devices"
This should open the USB/COM port list showing the assigned numbers for each port. Click on each port number, eg (COM 3) (COM 4) (COM5) etc.

Now open up WTT and click "Extras" > COM PORT and a window should appear with a COM Port selected eg (COM 3) >Click "OK"

If it says "COM Port not available" unplug the adapter and move to the next USB port and repeat the last step above (in blue). A different COM Port will appear in the window, so click on it and see if it will accept that. If not move to the next USB until you find one acceptable.

This is from memory (not the best I'm afraid) so hopefully it's not the recipe for scrambled eggs I have given you! Smile

Hope it helps. Thumbs Up
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #224807624th Aug 2021 1:34 pm
View user's profile Send private message View poster's gallery Reply with quote
Frisian Driver
 


Member Since: 23 Aug 2021
Location: Baden-Würtemberg
Posts: 80

Germany 2008 Discovery 3 TDV6 Base 7 Seat Auto Barolo BlackDiscovery 3

@ PROFSR G: Thank You!

It doesn't really work. I'm shure it was up to me. Mad

Anyway I found the right driver for the converter cable. Inside the adapter there is an FT232 IC. And the driver for this USB- K-L interface is downloadable on the FTDI Chip - site:

https://ftdichip.com/drivers/vcp-drivers/

Now it works perfectly! Thumbs Up

Best Regards!
  
Post #224810724th Aug 2021 5:06 pm
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 4577

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3

Interesting, but I've never had to look for the driver. Thumbs Up
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #224811124th Aug 2021 5:26 pm
View user's profile Send private message View poster's gallery Reply with quote
discobob1980
 


Member Since: 22 Aug 2021
Location: Chorley
Posts: 30

United Kingdom 2008 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Frisian Driver wrote:
@ PROFSR G: Thank You!

It doesn't really work. I'm shure it was up to me. Mad

Anyway I found the right driver for the converter cable. Inside the adapter there is an FT232 IC. And the driver for this USB- K-L interface is downloadable on the FTDI Chip - site:

https://ftdichip.com/drivers/vcp-drivers/

Now it works perfectly! Thumbs Up

Best Regards!


Thanks for this dude! Very Happy

You have solved an identical problem i had with windows 10 and the cable. Would not have figured it out on my own. I did a forum search.

Had to run the driver exe twice for some reason but its all good and sees the com port now!

Now for the diagnosis to take place...............
 2008 Discovery 3 xs 2.7 TDV6  
Post #227199310th Jan 2022 5:06 pm
View user's profile Send private message View poster's gallery Reply with quote
Frisian Driver
 


Member Since: 23 Aug 2021
Location: Baden-Würtemberg
Posts: 80

Germany 2008 Discovery 3 TDV6 Base 7 Seat Auto Barolo BlackDiscovery 3

BTW:

You have to click the [Stop Diagnose] button befor exit the WTT programm! Otherwise in many cases the next time you open WTT you can't start [Start Diagnose] the diagnostic part. In this situation click the [Stop Diagnose] and then click the [Start Diagnose].
  
Post #227215411th Jan 2022 10:15 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site