Yes, but not until you're an established member, take a look at the For Sale/Wanted RulesThe End
19th May 2015 12:23 pm
briwr250
Member Since: 22 Feb 2015
Location: Llandegfedd
Posts: 10
Hey guys. I've been bloomin daft and bought a set of range rover alloys. Went to fit them and realised they dont fit with my original wheel nuts as the stud holes are smaller. They are they wheels with the dimples between the stud holes. Does anyone know if they can be "made" to fit properly???
27th May 2015 4:03 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72774
Of course they can be made to fit using a honking big drill but you wouldn't want to drive on them.
You're not the first and won't be the last to buy wheels that don't fit. Any pics or link for what you bought?
27th May 2015 5:53 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10296
Its not just the holes that are wrong - if its the L322 (pre 07 FFRR) 19's, then these foul the front brake calipers anyway, so no good to you.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
27th May 2015 5:59 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72774
Does sound like pre-07 wheels, deffo a no fit.
27th May 2015 6:00 pm
briwr250
Member Since: 22 Feb 2015
Location: Llandegfedd
Posts: 10
Would anyone do spacers that i could get??
27th May 2015 9:18 pm
briwr250
Member Since: 22 Feb 2015
Location: Llandegfedd
Posts: 10
Ok cheers fellas
Best i get on ebay for a set that fits
27th May 2015 11:07 pm
robmcconnell
Member Since: 01 Nov 2012
Location: Sydney
Posts: 13
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10296
L322 rims should be a straight fit on your D3, but I dont recognise that rim pattern as a genuine LR rim.
Early L322 used a smaller wheel bolt, so the thing to check (apart from if they are gen LR, and check the wheel load rating as well, should be stamped in the back of the casting somewhere) is if your wheelnuts fit. Easiest way is just spin one of your off and try it in the hole in that new wheel
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
24th Nov 2015 9:27 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72774
Didn't L322 hubs change from MY10 onwards?
Agreed, doesn't look like a genuine wheel. Best way to see if it fits is to try it s'pose.
24th Nov 2015 9:29 pm
sylfest
Member Since: 09 Jun 2011
Location: Essex
Posts: 40
Thank you both.
The seller has told me they came off his 2011 Autobiography RR.
I was hoping to save myself a round trip to Bristol just to find out if they would fit
Cheers Sylfest
24th Nov 2015 10:40 pm
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
Get him to look at back off wheel and take pictures of the casting information on the inside of the wheelMY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
