MarkBrown
Member Since: 25 Jan 2022
Location: Preston
Posts: 14
  
|
| Rear Suspension Bush Installation |
|
So after weighing up my options, I decided to go for bush replacement rather than changing the arms - I like a challenge! I've got all the arms off and new lemforder bushes to go in however I have a bit of a problem...
What angular orientation do the bushes need to be installed at? I have seen in other sources that the lower arms have an 8 degree angle at normal ride height and the solid sections of the bush should be vertical at this setting however I can't find any information for the uppers. I would have copied the existing however they had become completely disbonded from the shells so were already loose when I removed the arms.
Many thanks in advance.
Mark[/b] Mark
Discovery 4 HSE SDV6
|
 1st Apr 2024 2:42 pm |
|
|
