Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Can you retro fit front fog lights ?
Greetings !
Has any one done a retrofit to the front fog lights on a D4, and if so is all the wiring all in place and just a matter of plug and play ?
Or will it need enabling , and how much of a job is it ?
Any input is appreciated
Cheers
Sharks.MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
12th Jan 2012 11:50 am
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
Admin note: post content removed at user request
12th Jan 2012 6:53 pm
Nizmo
Member Since: 04 Oct 2012
Location: Blackpool
Posts: 5
Bump,
Has anyone done this? Has anyone got the part numbers of what's needed?
Thanks,
12th Mar 2013 2:26 am
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Yes Nizmo i have done it on mine i will try and dig out the part numbers you require, but you will require it enabling after fitting I got Wiggs to wield his magic on mine MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
12th Mar 2013 8:38 am
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Nizmo you can cut out the lights from the back of the bumper as the outline is etched in the plastic.
I got my lights off the bay
From LR you will require :-
Fog light bezel LR015161
--------''--------LR015162
Harness down at LR parts list as Jumper LR021050
Switch (you have change the whole thing) LR010876
Screws (to mount the lights) LR010155 (Qty 10)
Think that's it
Cheers
Sharks.MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
12th Mar 2013 8:55 am
mattkirkby
Member Since: 29 Jul 2014
Location: Peterborough
Posts: 9
Hi Sharkysharks
How much would you say this cost you all in?
Thanks
30th Jul 2014 12:56 am
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Matt without the bumper which I got off the bay
For all the bits including washer jets, piping, wiring loom, parking sensors, fog lights and bezels the price was around £360 !!
Hope this helps MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
30th Jul 2014 3:35 pm
mattkirkby
Member Since: 29 Jul 2014
Location: Peterborough
Posts: 9
Hi thanks for getting back to me
Can you not cut holes and use the existing disco 4 GS bumper?
Thanks
30th Jul 2014 3:43 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Yes you can there is a outline you can cut round on the rear of you bumper MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
30th Jul 2014 3:53 pm
mattkirkby
Member Since: 29 Jul 2014
Location: Peterborough
Posts: 9
Excellent, I already have parking sensors...do your fogs wire in to the same loom as the sensors or a different one?
Thanks
30th Jul 2014 4:26 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Matt it's a different loom but the plug is located next to the PDC plug behind the O/S headlamp MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
2nd Aug 2014 9:40 am
Parallax33
Member Since: 03 Jun 2014
Location: Christchurch
Posts: 1125
i fitted these to my TD5 to replace the water damaged originals... they looked good but i only opted for the 4 led version... absolutely useless as fog lights and gave a blueish tinge to the light.
they could be independantly wired to act as DRL's as i did with mine
20th Aug 2014 3:28 pm
ifrasz
Member Since: 25 Oct 2016
Location: Sri Lanka
Posts: 3
i have a d4 s (my2015) i checked the fuse box and the fog lamp fuse is in place and there is a wire harness plugged into a dummy behind the headlamps which i hope is for the fog lamps. Will I be able to retro fit the fog lamps too? I live in sri lanka and i know the dealer doesnt do the activation stuff. would greatly appreciate if anyone can help me out. Thank you! (Where can i get an IID from if i was to do the activating myself.
25th Oct 2016 2:42 pm
ifrasz
Member Since: 25 Oct 2016
Location: Sri Lanka
Posts: 3
[quote="SHARKYSHARKS"]
From LR you will require :-
Fog light bezel LR015161
--------''--------LR015162
Harness down at LR parts list as Jumper LR021050
Switch (you have change the whole thing) LR010876
Screws (to mount the lights) LR010155 (Qty 10)
the harness switch and screw part numbers are all good according to lrdirect but the foglight bezel gives me this:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
