Member Since: 07 Feb 2010
Location: Devon
Posts: 140
Rear plastic cover on top of tailgate
Cruising at a steady 130km/h and heard a clack then spotted something fall and then shatter or the road surface and disappear off into the the distance (all through the rear view mirror). Pulled up at the first opportunity and found that the plastic shroud that surrounds the third brake light had vanished!
The brake light still functions but appears to be held in place with the adhesive that they used to stick the plastic cover on with..
I'm quite happy tacking simple jobs myself but what would I need to sort this out myself? I imagine that the cover is a separate part but not sure how easy it would be to deal with the adhesive....MY11 D4 SDV6 SE LHD (with remote park heater, heated seats in row 2, heated steering wheel and rear HVAC controls!)
21st Apr 2014 5:01 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3653
I thought the light was part of the assembly, there are a few on ebay at the moment.
I'd contact The Large One to see how much they are first before ebay though.
21st Apr 2014 5:18 pm
ruben D3 Decade
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2426
this is a clear case for the application of the official warranty
lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
Last edited by ruben on 21st Apr 2014 5:39 pm. Edited 1 time in total
21st Apr 2014 5:38 pm
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
Wow. Considering the heavy amount of swearing people go through to replace the high level brake light, and the fact that they usually fail miserable in taking off that plastic cover and end up smashing it with a hammer, I'm really surprised this came off simply by wind power Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
21st Apr 2014 5:39 pm
MogulBoy
Member Since: 07 Feb 2010
Location: Devon
Posts: 140
Car is just over three years old and was supplied in the UK so I don't anticipate that my local Swiss servicing dealer would spend much time on a goodwill/warranty claim so 'happy' to spring for the cost of fixing this (it's the first 'fault' I have had so can't complain!).
Should I just get the part and some windscreen adhesive such as "Sikaflex 255FC", remove as much of the old adhesive as possible and then re-apply using a similar quantity?MY11 D4 SDV6 SE LHD (with remote park heater, heated seats in row 2, heated steering wheel and rear HVAC controls!)
22nd Apr 2014 10:54 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Yes - remove existing sealant and replace.
I'm astonished that it came adrift given the effort you need when trying to replace one.Land Rover - Turning Drivers into Mechanics Since 1948
P.S. wrt the 'correct' adhesive to use, the LR part No. is STC50551 which appears to be Terostat 8596 and seems to be rather expensive at £20-27 a pop. The Sikaflex 255FC stuff can be found for less than half that.MY11 D4 SDV6 SE LHD (with remote park heater, heated seats in row 2, heated steering wheel and rear HVAC controls!)
22nd Apr 2014 11:34 am
MogulBoy
Member Since: 07 Feb 2010
Location: Devon
Posts: 140
The plot thickens..
I had some body/paint repairs done on my insurance last December taking care of damage caused by hailstones last summer - but I wasn't aware that they had touched the tailgate...
It turns out that they must have done and come to think of it, I do recall hoovering out bits of red and black plastic in the rear boot after collecting it. Having now had the chance to inspect this area in a bit more detail, I know find more red and black plastic shards in the opening and some scratch marks where it would appear that the original third brake light cover was removed!
I guess they used the wrong adhesive to stick the new one on! Oh well, I shall have to pass by the body shop and let them sort it out for me. Well done to all those who refused to believe that the original item would never have just come off with air pressure!
MY11 D4 SDV6 SE LHD (with remote park heater, heated seats in row 2, heated steering wheel and rear HVAC controls!)
24th Apr 2014 6:25 pm
MarsKy
Member Since: 23 Dec 2011
Location: Lanarkshire
Posts: 847
Two weeks out of the 3 year warranty and I just noticed that the high level brake light has started to split open (you can run your fingernail inside it):
Click image to enlarge
It was in last week to get the rear window taken out and then re-bonded back in. Can't say one way or the other if that was anything to do with it.
Edit: I have a photo of the light from 4 weeks ago (to show the dealer where I was getting water ingress in my rear window) and there is no split.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
