Member Since: 02 Sep 2007
Location: Staffordshire
Posts: 2393
A quest for dimensions
A fairly simple question, if you have a D3 to hand, and very hard to answer if not.....
How large is the "void" that is occupied by the folded third row of seats (below the floor)?
And a little follow on question, how hard is it to remove the third row seats? - The thought is that it will make a useful hidden storage area for things like tool kit etc. that normally end up in the back and not hidden when the load area cover is down, or all the seats are flat. I'm not likely to use the 3rd row of seats very often (if ever)
TIA
Rob
3rd Sep 2007 10:44 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26714
I'm sure its been done. The seats should be easy to remove, complete with frame and mechanism. I imagine it leaves a shallow but large recess.
Don't know the exact dimensions but the space is the size of the seats and (from memory) about 4" deep
The seats are a bit of a pain to remove unless you can work out a way of removing them separately, when we took mine out they came out together, are awkward, heavy (probably about 70-80kg) and 'flop' around a lot, a ratchet strap holding the bases against the backs helps to keep them on one pieceThe End
3rd Sep 2007 10:54 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50952
ISTR after helping to remove Slimers that there is reasonable storage ...its tapered though as the seat backs are thinner than the seat bases ...so I would say roughly 5 inches depth growing to 7 inches depth x the width of the seat bay 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
3rd Sep 2007 10:58 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50952
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
I see you managed to get a shot of the infamous 'seat thief' then Si ? and theeeeennn......???
3rd Sep 2007 11:02 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50952
I'm only laughing because your idea of 4 inches is somewhat different to my idea of 5 and 7 inches 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
BUT........ which of you is being the modest one The older I get, the more I realise that people confuse wrinkles for wisdom
Founder member of Club FFRRV
Club Orange, Mint or Fruit
Club Walnut Sniffers
3rd Sep 2007 11:05 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
that void looks at least a foot deep to me..and theeeeennn......???
Member Since: 02 Sep 2007
Location: Staffordshire
Posts: 2393
Thanks guys, I'm sure the tip about the ratchet strap will be forgotten and re-learned.
Some planning ahead I notice, the First Aid box and spirit level were obviously placed to give indications of the size of the hole.
From the pics I see I will need a new "flat" tool box rather than the "tall" one that lives in the P38 spare wheel hole that might be an "improment", because everyting tool I look for is at the bottom of the box....
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum