- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
- If you have a DISCO3.CO.UK account you do not need to re-register, just Log In as normal
caverD3
Member Since: 03 Jul 2006
Location: Sydney
Posts: 5287
  
|
| Looking for Space Behind the Dash? |
|
found this:
 | | Click image to enlarge |
The piece with the vent just pulls off.
I am sure there will be some more on the other side behind the light switch.
I put a small amp for the aux signal here. Will post when I have it working properly, still some noise. "A society that will trade a little liberty for a little order will lose both- and deserve neither"
Thomas Jefferson.
TDV6: Adaptive Headlights, Electronic Rear Diff, ARB Bar, Blaupunkt Speakers, JVC Powered Subwoofer, Removable Snorkel, Mitchell Bros Tow Hitch, Pioneer After Market Head Unit, Zenarc Touch Screen, In Car Sub-notebook, GPS Anntenna, Steering Wheel Control Adaptor, Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
 Sat Nov 10 2007 6:06am |
|
|
Disco_Mikey
Site Sponsor
Member Since: 29 May 2007
Location: Perthshire / Dundee
Posts: 2121
 
|
Only if you dont have a cup holder 
|
| Sun Nov 11 2007 2:25pm |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Sydney
Posts: 5287
|
Even with a cup holder there is plenty of space. Without one you still have the small storage space.
There is a lot of space beyond this.  "A society that will trade a little liberty for a little order will lose both- and deserve neither"
Thomas Jefferson.
TDV6: Adaptive Headlights, Electronic Rear Diff, ARB Bar, Blaupunkt Speakers, JVC Powered Subwoofer, Removable Snorkel, Mitchell Bros Tow Hitch, Pioneer After Market Head Unit, Zenarc Touch Screen, In Car Sub-notebook, GPS Anntenna, Steering Wheel Control Adaptor, Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| Sun Nov 11 2007 3:50pm |
|
|
freddy
Member Since: 21 Nov 2007
Location: Lutterworth
Posts: 7
|
| Re: Looking for Space Behind the Dash? |
|
Quote:
The piece with the vent just pulls off.
How did you get this off? Mine's not keen to be removed. I need to get the vent out to remove the pound coin that my daughter posted down there!
|
| Mon Dec 03 2007 11:41am |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Sydney
Posts: 5287
|
You have to give it a good pull from the bottom outwards, don't be shy about it it requires a bit of force.
However I don't think it will be easy to find a coil if it has gone past the vent, but good luck.
If it isn't just behind the vent drop the lower glove box and see where the conduits go. "A society that will trade a little liberty for a little order will lose both- and deserve neither"
Thomas Jefferson.
TDV6: Adaptive Headlights, Electronic Rear Diff, ARB Bar, Blaupunkt Speakers, JVC Powered Subwoofer, Removable Snorkel, Mitchell Bros Tow Hitch, Pioneer After Market Head Unit, Zenarc Touch Screen, In Car Sub-notebook, GPS Anntenna, Steering Wheel Control Adaptor, Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| Mon Dec 03 2007 12:27pm |
|
|
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 399
 
|
is a cup holder able to be retro fitted? MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
| Tue Apr 01 2008 7:11am |
|
|
Ken
Member Since: 20 Feb 2006
Location: Playing with the Grey Dogs
Posts: 8896
|
yep in the UK
|
| Tue Apr 01 2008 7:13am |
|
|
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 399
|
hmmmm. I guess it would be realtively simple....need a part number...  MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
| Tue Apr 01 2008 7:15am |
|
|
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4313
 
|
BlackPerth wrote:hmmmm. I guess it would be realtively simple....need a part number...
Not sure what Ken meant about the UK....I have a LHD D3 and bought a cup-holder thingy from Nick @ Yeovil...it fits perfectly....I'm sure it's a one-size-fits-all type of thing:
Part #: FBD500110PVJ
Price is around 25-30 GBP plus shipping.
Hope this helps  2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG
|
| Tue Apr 01 2008 7:36am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
