Member Since: 20 Jan 2019
Location: Bradford West Yorks
Posts: 16
Discovery 3 front diff
Hi does anyone know where i might find the Crown wheel and pinion preload and end float for the front diff as i cant find that info on the net?
2nd Feb 2019 11:14 am
Leeby7
Member Since: 20 Jan 2019
Location: Bradford West Yorks
Posts: 16
Front diff
Anyone any ideas for the above please?
2nd Feb 2019 9:00 pm
Leeby7
Member Since: 20 Jan 2019
Location: Bradford West Yorks
Posts: 16
Apparently you can get all the info from Topix but it isnt cheap by no means!
5th Feb 2019 12:30 am
XDAndy
Member Since: 16 Jan 2018
Location: Gibraltar
Posts: 597
I’ve had a poke around my files for the front diff, the ‘description and operation’ section and ‘specifications’ section, and found some reference to the info you are looking for.
Click image to enlarge
Ive checked the ‘specifications’ section and cannot find a torque value for the pinion nut.
Perhaps the guys who contributed to that , such as Bodsy and Disco_Mickey who are both quite active here, may be able to help.
Also find this thread on another site that talks of the experience, but doesn’t have a torque value. One guy there suggests counting the threads before taking the nut off so it goes back in exactly the same place.
Also, there’s a YouTube channel called ‘vehicle repairs toolbox videos’, and the guy there has done some stuff on setting up landrover differentials. Nothing specific to the disco 3 as far as I can see.
But he did do a vid with ‘Ashcroft transmissions’ so may be worth getting in touch with them to see if they have any info they can give.
5th Feb 2019 1:36 pm
Leeby7
Member Since: 20 Jan 2019
Location: Bradford West Yorks
Posts: 16
Cheers for the info,i contacted Ashcroft who replied with, we dont deal with discovery 3 differentials and know nothing about them!
5th Feb 2019 9:07 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
5th Feb 2019 10:17 pm
Leeby7
Member Since: 20 Jan 2019
Location: Bradford West Yorks
Posts: 16
Cheers for that Daz
5th Feb 2019 10:38 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Not loads on it, that’s out my Haynes Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
5th Feb 2019 10:41 pm
XDAndy
Member Since: 16 Jan 2018
Location: Gibraltar
Posts: 597
So fits with the thread on the other site about ‘counting’ the bolt threads so nut in same place.
Doesn’t help that the workshop manual talks of a specified torque, then doesn’t list it
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum