lee1970
Member Since: 15 Feb 2013
Location: wilts
Posts: 13
|
Hi all, I have a problem with a 2008 disco 3 Egr valve fault.
I have replaced both Egr valve, with genuine landrover ones,
But car keeps losing power, on the road.
Have checked air intake system for leaks,
The fault code I keep getting is p045a-00, no mill lamp on.
Special program s off turned off,on dash.
Also have a fault code in all terrain control module of
u0401-94,
Have checked wiring, all looks good
Anybody had this fault before????
Also transfer case ecu has had a lot of crossion on connectors,
Any help would be great
|
8th Nov 2019 9:17 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
|
First step would be to clean up that connector as it can throw different faults. "U" type faults are information only
|
9th Nov 2019 3:29 am |
|
|
lee1970
Member Since: 15 Feb 2013
Location: wilts
Posts: 13
|
Yes l have clean up with some electrical contact cleaner.
|
9th Nov 2019 10:49 am |
|
|
Littlewill
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
|
Do you have an IID tool? These are expensive but gold dust with one of these. The IId will let yoy watch the function of the valves so you can see if they are stuck open or not for example
|
9th Nov 2019 10:58 am |
|
|
lee1970
Member Since: 15 Feb 2013
Location: wilts
Posts: 13
|
Thanks for your reply,
No I do not, but I have use of an autologic,
Have look at cleaning cycle,all within 10%.
Have to do about 4 miles before it faults.
Can any tell me if the fault code is for a specific side?
What dose the b stand for in fault code ?
|
9th Nov 2019 4:03 pm |
|
|
lee1970
Member Since: 15 Feb 2013
Location: wilts
Posts: 13
|
|
9th Nov 2019 10:05 pm |
|
|