cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
|
Ok I’ve bled the front pipe for a minute while engine is cool/warm. And the new reservoir top chamber is full. The screw is tight.
But heat is very slow to feel. Was fine before reservoir swap. (Due to old one being jammed)
Am I doing something wrong here? Should I bleed it for a long time or turn fans on or something?
Maybe my method is wrong
|
2nd Nov 2020 6:05 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10367
|
I’d just take the cap off over night and leave it off. Then in the morning
Give the middle one a bleed
Run the engine for 8 mins or so.
Bleed the middle one.
Replace cap
|
2nd Nov 2020 6:33 pm |
|
|
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
|
Hi what do you mean by middle one please?
The screw valve above the fan belt?
And thanks I’ll take cap off coolant reservoir now
|
3rd Nov 2020 6:34 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10367
|
yes
|
3rd Nov 2020 6:41 pm |
|
|
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
|
Thank you
|
3rd Nov 2020 6:44 pm |
|
|