Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15214
You'll need to wire in resistors.I was a normal heterosexual chap, but in these new woke awakenings I now identify as a Wardrobe.
8th Jul 2010 5:24 pm
scootay2k5
Member Since: 20 Jan 2010
Location: nottingham
Posts: 238
what size? i can get them from work easy peasy
8th Jul 2010 5:44 pm
scootay2k5
Member Since: 20 Jan 2010
Location: nottingham
Posts: 238
Verydisco wrote:
Shrinky wrote:
Good work But it's OK to pull the lens apart and remove the reflector but not to put an LED bulb in because it could fail an MOT
Hi
about LEDs, the Philips Silver Visions do not come in our P27/7W (aka 3157 (took me a while to find out the name switched it seems...) so i need to source another 3157 in silver.
they are pretty rare but one can find them online (I always try to buy locally before buying on line)
In my search i found 2 types : the actual 3157 buld then the LED version of it.
does anyone know if this 32 LEDs bulb would compensate the fact there is no fresnel lens anymore ? As much as i would prefer the regular bulb type, the fresnel missing is a bit worrying. Also, doesn't the Disco 3 has probleme with LEDs (not enough resistance ?)
With Regards the above, i have added LED bulbs after doing this modification and everything works fine except for the ticker as its now going to fast as if i have a bulb blown. i have been told to wire in a resistor to compensate the low resistance caused by the LED, but i am unsure what size ohm resistor, how to wire it parallel/series etc. etc.
can anyone help?
9th Jul 2010 12:58 pm
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Wire a 10 ohm 25 watt power resistor in parallel with each lamp, that will fix it.
It's just so as the new "combination" (LED + resistor) draws about the same amount of current as the original bulb.
The aluminum cased ones are ideal as they can be fixed down somewhere to make them more secure.Clive
9th Jul 2010 1:49 pm
Verydisco
Member Since: 02 Jan 2005
Location: A bit there, a bit over there and sometime at home, France
Posts: 1006
Hi lads,
Just in case, my modified Xenon headlamps with brand new chromed bulbs + spare are for sale @ 299 pounds, free delivery at Billing if pre paid.
thoses are the first one ever to be moded !l=Oo\________/oO=l l:Ool======loO:l
Current
RANGE ROVER Vogue 4.4L TDV8 - 2012 - Orkney Grey, on Black, on Piano Black.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
FREELANDER 2 Td4 HSE "000" - Santorinin Black on Black
Gap Diagnostics' Classic and BT IID Tools!
Previous:
RANGE ROVER TDV8 x3
RANGE ROVER Td6 x1
RANGE ROVER Classic 3.5L V8 x1
DISCOVERY III x3
DISCOVERY II x3
DISCOVERY I x4
11th Jul 2010 6:06 pm
aaronbott
Member Since: 13 Jun 2010
Location: Sheffield
Posts: 86
is the textured part of the fresnol lens on the outside of the yellow plastic or inside ?
19th Jul 2010 7:35 pm
robgray
Member Since: 05 Jun 2010
Location: midlothian
Posts: 17
Here is a pic of the headlght mod that i done last night quite easys to do.
23rd Jul 2010 9:28 pm
Tawny Owl
Member Since: 22 Oct 2008
Location: Here and there
Posts: 1645
aaronbott
Do you mean the reflector strip ? If so it's on the outer side of the orange lens.
Rob , looks very 8) , Think on your colour it works well without the orange relectors
23rd Jul 2010 9:41 pm
scootay2k5
Member Since: 20 Jan 2010
Location: nottingham
Posts: 238
Click image to enlarge
26th Jul 2010 11:48 am
scootay2k5
Member Since: 20 Jan 2010
Location: nottingham
Posts: 238
Click image to enlarge
26th Jul 2010 11:49 am
Verydisco
Member Since: 02 Jan 2005
Location: A bit there, a bit over there and sometime at home, France
Posts: 1006
hello did you make them yourself mate ?l=Oo\________/oO=l l:Ool======loO:l
Current
RANGE ROVER Vogue 4.4L TDV8 - 2012 - Orkney Grey, on Black, on Piano Black.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
FREELANDER 2 Td4 HSE "000" - Santorinin Black on Black
Gap Diagnostics' Classic and BT IID Tools!
Previous:
RANGE ROVER TDV8 x3
RANGE ROVER Td6 x1
RANGE ROVER Classic 3.5L V8 x1
DISCOVERY III x3
DISCOVERY II x3
DISCOVERY I x4
26th Jul 2010 11:49 am
scootay2k5
Member Since: 20 Jan 2010
Location: nottingham
Posts: 238
Yeah took approx 1-2hours to do whilst having the odd can on a lazy afternoon ha! it was so easy and looks great now id recommend it to any disco owner
26th Jul 2010 12:07 pm
Verydisco
Member Since: 02 Jan 2005
Location: A bit there, a bit over there and sometime at home, France
Posts: 1006
I would not to it to any D3 really, some of them stand the orange bit quite nicely, others are plain wrong with it, like my Maya gold was...
nice job
you will get over the LEDs, they do not get bright enough, get the orange or the chrome ones
what did you glue the orange strip with then ?l=Oo\________/oO=l l:Ool======loO:l
Current
RANGE ROVER Vogue 4.4L TDV8 - 2012 - Orkney Grey, on Black, on Piano Black.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
FREELANDER 2 Td4 HSE "000" - Santorinin Black on Black
Gap Diagnostics' Classic and BT IID Tools!
Previous:
RANGE ROVER TDV8 x3
RANGE ROVER Td6 x1
RANGE ROVER Classic 3.5L V8 x1
DISCOVERY III x3
DISCOVERY II x3
DISCOVERY I x4
26th Jul 2010 12:20 pm
scootay2k5
Member Since: 20 Jan 2010
Location: nottingham
Posts: 238
the smallest bit of industrial superglue i could get away with as when it dries it wont be clear, but i succesfully got away with it
26th Jul 2010 5:13 pm
Tawny Owl
Member Since: 22 Oct 2008
Location: Here and there
Posts: 1645
Looks 8)
I used thin strip of Velcro on mine to save glueing. Still hanging in there
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
But it's OK to pull the lens apart and remove the reflector but not to put an LED bulb in because it could fail an MOT 
