Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Managed to get 2 X out by heating them up, other 4 x no chance
Think I’ve got no choice now that to wait for the other Torx bits
Wondering if there’s anything else I can do in the mean time, cleaned the threads, applies more plus gas
Hit them all with an impact driver
Just hope I don’t have to cut the heads off
Better pic, wondering if its worth about trying to cut the excess threads off
Last edited by gstuart on 9th Jul 2019 6:49 pm. Edited 1 time in total
9th Jul 2019 3:46 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10368
no.
wait for better tools
9th Jul 2019 5:22 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Thks Pete
Indeed ur right , just got to wait for the better torx bits , hopefully weds, Thursday
So replaced the shrieder valves with nice new ones
Managed to finally get the glue off the inside of the back door where it had a window tint , couldn’t see out the back of a night time , took about an hour to get all the glue off
Redone the bonnet where I had removed the letters , also left the lights out because of being in the middle of getting the condenser out
So Just stuck now of just getting the 4 x torx bolts out
Think I’ve got everything removed , so it should just be those torx bits to come out
Last edited by gstuart on 9th Jul 2019 7:58 pm. Edited 1 time in total
9th Jul 2019 6:52 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Also if this helps others in future
The bolts that fit the pipe block onto the condensor ( as per last pic ) are M6 and using a 8mm socket
Bought new stainless steel bolts , they have a 10mm head
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum