Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
I did get prices for the connectors ...but work out expensive as you have to buy a certain amount ..
here is a copy of email
Your details have been passed onto me from Linda @ IMS; I understand that you require the following parts
1072958 3400SMBA.2E10.029
1072959 3400.SMBA.2F10.029
1072960 3400.SMBA.2I10.029
The minimum amount I can buy of each part is 40 pieces and we would be looking at about 2-3 weeks to get the product to you, price wise you are looking at £2.50 per piece so £300 for all 120 pieces.
The only way I could get your account set up is if you would like to send a cheque which we would need to clear before we order the product of IMS, we can then ship the product next day to you.
Total cost would be
Goods £300.00
Carriage £12.50 (next day service)
VAT £54.69
Total £367.19
Please feel free to contact me if you have any questions.
and this was from northern connectors in St helens
ITEM NO. DESCRIPTION QTY Price Unit Comments
R114082325 FIC DR F SERT CAB 2,6/50S C100 100 0.858 Each 7 DAYS
R197112E90 BOITIER POUR FIC DR C100 100 0.20 Each 7 DAYS
R197112F90 BOITIER POUR FIC DR C100 100 0.20 Each 5 WKS
R197112I90 BOITER POUR FIC DR C100 100 0.20 Each 7 DAYS
Carriage Out 1 7.50
top item is the smb (coax )connector and the following 3 are the fakira plastic shrouds (min 100 each)
However i have found one from farnells which fit perfectly ( although they don't have the coloured shroud on)
Farnell part number 1169647
I used RG174 coax cable which is the correct size for the connector...then some female Rca connectors at the other end .
they can also be orderd individually but then down side is the delivery cost if your order is under £40 + vat Tintenter
Corris Grey Discovery 4 HSE
Bigger permagrin now installed
Semper in excretum, sole profundum moveat.
9th Jan 2008 12:31 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Tintenter,
Your link is the same part as mine in the farnell link.
Farnells however , have a minimum of £20 order ..i didnt notice this at the time as i ordered a roll of Coax and 5 connectors ..so mine came to just over £20.
Welshdisco's link ..you can get them individually aswell....
Oh and there cheaper too G4 Gone ...but not forgotten
9th Jan 2008 1:02 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
has anyone found a 'short-cut' method yet to the video input screen, or is the only way still through the diag route?
Mand theeeeennn......???
9th Jan 2008 1:12 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Apart from the £700 box that adds another icon on the touch screen ....no ..well not that i know of anyway. G4 Gone ...but not forgotten
9th Jan 2008 1:15 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
there's a word for that then I think! and theeeeennn......???
9th Jan 2008 1:18 pm
mal_NW
Member Since: 04 Mar 2008
Location: Garstang, Lancs
Posts: 937
I have a place near me with the connectors in, it describes it
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Proberly ..but i would measure it ..dont forget you need to hide it and go up and down at each endG4 Gone ...but not forgotten
2nd Apr 2008 6:16 pm
mal_NW
Member Since: 04 Mar 2008
Location: Garstang, Lancs
Posts: 937
Re: Sat nav rear connectors / fakra smb plugs
wiggs wrote:
Has any body managed to locate a source for the 3 plugs that fit into the back of the sat nav unit allowing input of tv/dvd / reversing cam / companion cam?
These
I would rather use the plugs than risk my unsteady hand with a soldering iron.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum