Member Since: 18 Jun 2017
Location: Melbourne
Posts: 600
For the meanings you will need a diagnostic reader, i would start by making sure the battery is fully charged.
27th Oct 2020 2:22 am
highlands
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5095
Ryan M wrote:
Hi team!
The fluid was added in the gearbox almost 10L and unfortunately nothing happen , all drive lost .
Kindly advice
Thank you
That's an incredible amount.
The dry capacity is 9.5L and even when changing the oil you rarely get more than 5L into the box.Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
27th Oct 2020 2:29 am
Ryan M
Member Since: 01 Jul 2020
Location: Goma DR Congo
Posts: 19
Dear All,
My Disco3,HSE 2005 diesel has again the same issue of loosing all drive then I have replaced the auto gearbox with an used one and so far car is moving with limited speed 3 and displayed F ( loss of power) with message Transmission faulty and engine system fault. I have to restart the car and everything comes to normal but when reaching the 3 gear while driving the message pop up again. Kindly I need more guidance on this issue. Torque converter replaced and tried to clear the fault with the scanning tool but no success
Any idea will be helpful
Derrick
Last edited by Ryan M on 3rd Apr 2022 10:25 pm. Edited 2 times in total
27th Oct 2020 10:11 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
Brake switch or rear brake lamps
28th Oct 2020 12:20 am
Ryan M
Member Since: 01 Jul 2020
Location: Goma DR Congo
Posts: 19
Dear All,
My Disco3,HSE 2005 diesel has again the same issue of loosing all drive then I have replaced the auto gearbox with an used one and so far car is moving with limited speed 3 and displayed F ( loss of power) with message Transmission faulty and engine system fault. I have to restart the car and everything comes to normal but when reaching the 3 gear while driving the message pop up again. Kindly I need more guidance on this issue. Torque converter replaced and tried to clear the fault with the scanning tool but no success
Any idea will be helpful
Derrick
4th Apr 2022 6:01 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
Ave you checked for fault codes and oil levelAndrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
4th Apr 2022 7:08 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10366
Did you program the gearbox megatronics with your cars vin number after fitting ? Gap iid with support can do that
Alternatively use you old black megatronics unit
4th Apr 2022 8:23 pm
Ryan M
Member Since: 01 Jul 2020
Location: Goma DR Congo
Posts: 19
Thank you for your feedback , we were not able to program or coding the gearbox megatronics simply because none was expert by doing that. So what we did I asked to use the old one from my auto gearbox which is giving me that message of F transmission faulty and lost of engine power. in addition to that oil has been top up whenever we replace the megatonics. Before we changed the torque converter,the code was P0741. No more code we are getting now.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Obviously, it was very much a tongue in cheek comment.
) 
