Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Tips & Tricks

Changing head light direction!
Post Reply Down to end
Page 5 of 7 <1234567>
mack1979
 


Member Since: 01 Dec 2008
Location: Buckinghamshire
Posts: 51

United Kingdom 

Unnecessary quote removed


Hmm, dunno, I guess they'd be the same but maybe someone with more clue about these things can answer that. In terms of the US you have more regs on new car sales but then in most (if not all, nowadays) states there is no equivalent to our MoT to check up that a car is road-worthy or legal, so you can bung on what you like.

You might need a different wiring loom for the xenons, as they are very high voltage, I don't know if they draw more power or have additional control units outside of the main headlamp unit itself.
  
Post #389345Wed Dec 17 2008 3:16pm
View user's profile Send private message View poster's gallery Reply with quote
LR3GuyJoe
 


Member Since: 02 Dec 2008
Location: Space Coast Florida
Posts: 408

United States 2005 LR3 4.4 V8 SE Auto Bonatti GreyLR3

Unnecessary quote removed

I live in florida and we dont do any checks. you would be suprised at some of the stuff you see driving around.

Apparently non adaptives are a straight swap from what everyone on here says. They are more abundent on your side of the pond but I know because we drive on the other side we dip our lights the other direction as I would assume europe does too. Id like to but a set form the UK if I can I just dont want to blind people comming the other way and always get flashed to turn my brights off.
  
Post #389377Wed Dec 17 2008 5:17pm
View user's profile Send private message View poster's gallery Reply with quote
BLACK BETTY
 


Member Since: 18 Oct 2008
Location: Louth
Posts: 571

Ireland 2005 Discovery 3 TDV6 SE Manual Zermatt SilverDiscovery 3

Replacmentxenon headlamp unit can be dropped straight in as the loom does not need any mod, the electronic ballast (xenon voltage control uni) is included in the lamp unit,

You will notice a slight flicker as you switch on a xenon unit that was swapped in for halogen unit, I led to believe that tis is because the supply power is FET controlled and switches in slower nad lower for halogen units by the D3, but has no long term detrimental effect AFAIK

The adaptive units that follow around bends do however need a whole load of extra tech to make them work, not just a swop and drop job

BB
  
Post #399941Sat Jan 10 2009 12:38pm
View user's profile Send private message View poster's gallery Reply with quote
simon
  


Member Since: 11 Jan 2005
Location: Sitting pensively in front of the mouse trap looking at the cheese
Posts: 18155

United Kingdom 2008 Discovery 3 TDV6 XS Manual Stornoway GreyDiscovery 3

I've had my MY05 xenon's on my MY08 D3 for a year now and apart from the flickering (when cold started before engine on or immediately after engine on) they have been perfectly OK.

If you turn on the lights after a few seconds of engine going, no flicker at all.

Bulbs so far have done 4 years Thumbs Up
  
Post #399945Sat Jan 10 2009 1:00pm
View user's profile Send private message View poster's gallery Reply with quote
Alan G
 


Member Since: 15 Oct 2008
Location: Lanarkshire
Posts: 1162

Scotland 2008 Discovery 3 TDV6 XS Auto Zermatt SilverDiscovery 3

Enable the Xeon setting with the like of Wigg's and his Faultmate and no more flickering, they just light up.

Had my 4x4 info centre etc activated as well as the headlamps and no more flickering. Thumbs Up
 ATB

Alan


http://www.youtube.com/user/Bonzo676767#p/u 
 
Post #567910Sun Dec 20 2009 3:55pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
 


Member Since: 11 May 2006
Location: Not here ^^^^ :(
Posts: 22710

Tunisia 2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3

This is a thread from the past!! But lets me ask question, is it just adaptive xenons that are changeable or or can non-adaptive/Halogens be changed?
 Can maybe be ar$ed a bit.  
Post #677398Wed Jul 28 2010 4:09pm
View user's profile Send private message View poster's gallery Reply with quote
choppa60
 


Member Since: 16 Oct 2009
Location: chelsea tractor land ....london
Posts: 892

United Kingdom 2008 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

Very Happy something i would also like to know ,as i tried putting my hands in to change the headlights,much stretching of arms and torn flesh ,i gave up ,how on earth are you supposed to find them anyway ,read the threads,looks like its off to france blinding french people along the way ,until at the campsite,more time then Very Happy
 2008 ,hse, it does what it says .  
Post #677457Wed Jul 28 2010 7:15pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
 


Member Since: 11 May 2006
Location: Not here ^^^^ :(
Posts: 22710

Tunisia 2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3

It's easy to take the lamps out, more complicated as I've got A bar fitted. Difficult at the mo as car at stealer. Mind you have set of halogens in junk room, will have a look after finish vino. Thumbs Up

PS just looked, as suspected no adjustment on halogens. SWMBO just told me off for leaving headlamp unit in middle of living room floor! Rolling Eyes Rolling Eyes
 Can maybe be ar$ed a bit.  
Post #677463Wed Jul 28 2010 7:24pm
View user's profile Send private message View poster's gallery Reply with quote
SN
 


Member Since: 03 Jan 2006
Location: Wishing I was ...
Posts: 11756

Tunisia 2008 Discovery 3 TDV6 SE Auto Zermatt SilverDiscovery 3

halogens need black tape - dead easy
 Steve N | 2008 TDV6 SE Auto | Was 2006 TDV6 S Auto | Club Tunisia | Am I Online?
 
 
Post #677681Thu Jul 29 2010 10:57am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
choppa60
 


Member Since: 16 Oct 2009
Location: chelsea tractor land ....london
Posts: 892

United Kingdom 2008 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

Very Happy Maybe I will just put some mud on the headlamps instead of tape Laughing
 2008 ,hse, it does what it says .  
Post #677684Thu Jul 29 2010 11:02am
View user's profile Send private message View poster's gallery Reply with quote
DSL
 


Member Since: 11 May 2006
Location: Not here ^^^^ :(
Posts: 22710

Tunisia 2006 Discovery 3 TDV6 S Auto Buckingham BlueDiscovery 3

Non adaptive xenons??
 Can maybe be ar$ed a bit.  
Post #677688Thu Jul 29 2010 11:11am
View user's profile Send private message View poster's gallery Reply with quote
Surfer
Site Sponsor 


Member Since: 14 Oct 2008
Location: brighton
Posts: 12

United Kingdom 
Still a little unsure - on the head light question

Just read all the above - my car is a 55 Hse - So its got XENONs but I don't think they are the type that swivel as you steer - I thought that came in on later models - does that mean I just need to stick stickers on....?
  
Post #677725Thu Jul 29 2010 12:36pm
View user's profile Send private message View poster's gallery Reply with quote
BrianT
 


Member Since: 17 Nov 2009
Location: Ayrshire
Posts: 507

Scotland 2005 Discovery 3 TDV6 SE Manual Adriatic BlueDiscovery 3

NON adaptive Xenons have the leaver as i changed mine when i went to France last month.

BrianT Thumbs Up
 MY 05 SE Adriatic Blue
98 Freelander xEi Gone
Club Wiggs 4x4 Info
Club 20" Stormers-OFF
Club 19" 6 spoke HSE's with MTR's-ON
Club Mantec NON-Winch
Club Cross drilled/Grooved discs with EBC pads
 
 
Post #677746Thu Jul 29 2010 1:39pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
choppa60
 


Member Since: 16 Oct 2009
Location: chelsea tractor land ....london
Posts: 892

United Kingdom 2008 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

Very Happy I have adaptive xenons , ? Do they have a lever , Rolling Eyes
 2008 ,hse, it does what it says .  
Post #677747Thu Jul 29 2010 1:44pm
View user's profile Send private message View poster's gallery Reply with quote
flinty99
 


Member Since: 17 Mar 2008
Location: County Durham
Posts: 2472

England 2008 Discovery 3 TDV6 HSE Auto Tangiers OrangeDiscovery 3

DSL wrote:
It's easy to take the lamps out, more complicated as I've got A bar fitted.


So, may seem like a daft question. With having an A-Frame is it just a case of removing the two top brackets to the grill? If I do that will I have enough room to drop the grill forward and then get the lights out.

With having the winch remote connector attached to the grill I don't believe I can easily fully remove the grill.

I assume I would then have to remove the light guards before I eventually remove the lights.

What a pain that is going to be at the ferry terminal.
 For details on the next Kielder Safari click visit the GToN website



Sold: HSE-G4, Tangiers Orange. (one of your 5 Discoverys a day)

Member of CFT 
 
Post #678233Fri Jul 30 2010 6:16pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 5 of 7 <1234567>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Powered by phpBB © 2001 phpBB Group. SEO by phpBB SEO
Copyright © 2004-2012 Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums Follow DISCO4.COM on twitter